OGS & AGS

Alvenius FlowMax® 48mm-610mm (1½”-24”)

Prefabricated pipes manufactured according to ISO standards for pressurized applications.

The pipes are available in two different groove profiles – OGS (Original Groove System) and AGS (Advanced Groove System) for larger dimensions. The grooves are available in different versions – machined (also available with a flush inside) and roll grooved. Normally, thick-walled rings with a machined groove are used, welded to the ends of the pipes. The pipes are compatible with Victaulic® couplings.

For more information, please refer to the product catalogue.

All information in this publication is given in good faith, and believed to be correct at the time of publication. However, no responsibility can be accepted for any errors, omissions or incorrect assumptions.

Standard Range

The product tables are optimized for viewing on desktop in landscape mode

Pipe OGS & AGS

Our pipes are available with different pressure ratings depending on the application.
To make it possible to easily adapt the system, the pipes are available in different lengths.
The pipes are designed according to SS-EN 13480-3.

Loading



*X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Pipe RG (Roll Groove)

For low pressures, there is the system with a roll groove at the ends of the pipe.
The system is called Roll Groove (RG).
The pipes are dimensioned according to the SS-EN 13480 series.

Loading



Coupling Flexible, model Victaulic® St 75

Incl. rubber gasket (EPDM). Flexible coupling for pressures up to PN25. Flexible means that the coupling allows for angular, linear and rotational movement due to vibrations or temperature fluctuations.

Contact Alvenius if you are uncertain as to which type of coupling to use.

Loading



*X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Coupling Flexible, model Victaulic® St 77

Incl. rubber gasket (EPDM). Robust flexible coupling for pressures up to PN63 depending on size. Flexible means that the coupling allows for angular, linear and rotational movement due to vibrations or temperature fluctuations.

Contact Alvenius if you are uncertain as to which type of coupling to use.

Loading



*X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Coupling Flexible, model Victaulic® 177N QuickVicTM

Incl. rubber gasket (EPDM). Type 177N QuickVic Installation-ready flexible couplings are designed so that the installer does not have to remove bolts and nuts during assembly. The design facilitates assembly by allowing the installer to directly insert the grooved end of the connecting parts into the coupling. Flexible means that the coupling allows for angular, linear and rotational movement due to vibrations or temperature fluctuations.

Contact Alvenius if you are uncertain as to which type of coupling to use.

Loading



Coupling Flexible, model Victaulic® AGS™ W77

Incl. rubber gasket (EPDM). Flexible means that the coupling allows for angular, linear and rotational movement due to vibrations or temperature fluctuations.

Contact Alvenius if you are uncertain as to which type of coupling to use.

Loading



*X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Coupling Rigid, model Victaulic® St 07

Incl. rubber gasket (EPDM). Provides a rigid joint designed to restrict axial or angular movement.

Contact Alvenius if you are uncertain as to which type of coupling to use.

Loading



*X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Coupling Rigid, model Victaulic® 107N QuickVic™

Incl. rubber gasket (EPDM). Type 107N QuickVicTM Installation-readyTM rigid couplings are designed so that the installer does not have to remove bolts and nuts during assembly. The design facilitates assembly by allowing the installer to directly insert the grooved end of the connecting parts into the coupling. Provides a rigid joint designed to restrict axial or angular movement.

Contact Alvenius if you are uncertain as to which type of coupling to use.

Loading



Coupling Rigid, model Victaulic® AGS W07

Provides a rigid joint designed to restrict axial or angular movement. CorroFlo-coated couplings can only be combined with welded pipe fittings due to the surface coating.

Contact Alvenius if you are uncertain as to which type of coupling to use.

Loading



*X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Rubber Gasket

Rubber gaskets as a spare part.

Loading



Tee

A wide range of equal tees and reducing tees are included in the standard range.

Loading



*CI = Cast Iron

**X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Elbow

Elbows are used when the deflection offered by the coupling is insufficient.

Loading



*CI = Cast Iron

**X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Reducer

Reducers are used to connect pipes of different diameters.

Loading



*CI = Cast Iron

**X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Adapter with Thread

Adapter with thread used to connect pipes to threaded valves or a threaded pipe system.

Loading



*TH = Threaded

Adapter OGS – K10

Used to connect OGS and Alvenius K10 systems.

Loading



*CI = Cast Iron

Hydrant Outlet

A hydrant outlet is an extended tee with a 1½” or 2” externally threaded outlet.

Loading



*X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Flanged Adapter

Alvenius offers flanged connectors to easily connect the system to other pipe systems, flanged valves and more.

Loading



*X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

End Cap

End cap for the system.

Loading



*CI = Cast Iron, Empty field = Welded Steel

**X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Welding Ring

Alvenius offers individual welding rings in all sizes to customize pipe sections. These welding rings are compatible with the pipe ends and can be connected to the rest of the system.

Loading



*Ut = Untreated

Ball Valve OGS – AGS

To further complement the system, Alvenius offers a wide selection of different types of valves.

Please see datasheet for each valve for exact specifications.

Loading



Butterfly Valve OGS – AGS

To further complement the system, Alvenius offers a wide selection of different types of valves.
Please see datasheet for each valve for exact specifications.

Loading



Alvenius Quick-Fix

Telescopic pipe. Available dimensions: From DN80 (89,3 mm, 3 inch) to DN300 (323,9 mm, 12 inch)

S = Minimum Stab Length for DN80 – DN150 is 125 mm.

Minimum Stab Length for DN200 – DN300 is 165 mm.

Loading



*X = 2 for Gray, 5 for Black, 6 for White, 7 for Red, 9 for Blue

Accessories – repair kit, CorroFlo

Kit for surface repair of RocShield and CorroFlo-coated pipes and fittings.

Loading



Alvenius reserves the right to make alternations without prior notice. Due to continuous product development, technical specifications may change. Installations must comply with the installations instructions.

Alvenius logo blue